City of Mesa Utilities Rate Selection Guide
City of Mesa Utilities (Energy Resources Department) is an Arizona municipal utility serving 18,000+ electric and 82,000+ natural gas customers, plus water and wastewater — about 95,000 combined accounts. The My Utility Account portal provides 24 months of billing history and usage analysis backed by an AMI smart meter rollout completing in October 2026, but there is no Green Button, EDI, or third-party API — consultants rely on the portal's guest access feature and direct Energy Resources arrangements.
Market Overview
As a municipal utility, Mesa sets its own utility rates through the city budget process, with rate schedules published on the city's Utility Rates page. Customers take bundled service; no competitive supplier choice exists.
Need to pull your actual usage data to compare rates? See the City of Mesa Utilities Data Access Guide →
Current Rate Schedules
Mesa sets utility rates by City Council ordinance, with electric adjustments effective February 1 and natural gas March 1 each cycle. Electric bills have three components: a flat System Service Charge ($19.72/month non-residential, proposed $24.72 for FY 25/26), seasonal tiered Energy Usage Charges, and the Electric Energy Cost Adjustment Factor (EECAF) commodity pass-through. Demand-metered accounts over 50 kW also pay generation ($3.52/kW) and distribution demand charges based on the 30-minute peak. The city's electric territory covers ~5.5 square miles of downtown Mesa (~18,000 customers); its gas system spans ~90 square miles in Mesa plus 235 square miles in Queen Creek/San Tan Valley/Pinal County (Magma service area, ~77,000 customers). Gas bills mirror the structure: service charge, seasonal Tier 1/Tier 2 usage charges (break at 25 therms residential), and the PNGCAF gas cost pass-through, with a Magma adjustment factor benchmarking against Southwest Gas.
Effective: February 1, 2025 · Full Tariff Book →
| Schedule | Type | Applicability | Structure | Rate |
|---|---|---|---|---|
| General Electric Service (Non-Residential) | commercial | All non-residential electric service where no specific schedule applies; single point of delivery, one meter | $19.72/month service charge (proposed $24.72); seasonal Tier 1/Tier 2 energy usage charges plus EECAF. Accounts over 50 kW pay demand charges: $3.52/kW generation plus distribution demand charges, billed on the 30-minute peak. Average commercial bill ~$530-610/month. See the city rate book for current tier prices. | —+ $3.52/kW generation (>50 kW) plus distribution demand |
| E3.6D Downtown Small Business Attraction Rate | commercial | New non-residential customers locating in Downtown Mesa, subject to eligibility criteria | Same structure as the standard non-residential schedule ($19.72 customer charge, demand charges above 50 kW, EECAF), but EECAF, energy, demand, and service charges are each reduced 25% during the eligibility period. Taxes not discounted. | 25% bill reduction during eligibility period |
| Customer Generation Electric Service | commercial | Customers generating more than 50% of annual consumption on-site with generation greater than 50 kW | Facility charge of $6.670/kW of demand determinant plus energy charges and EECAF — designed to recover grid costs from partial-requirements customers. See rate book for full terms. | —+ $6.670/kW facility charge |
| Non-Residential Natural Gas Service | commercial | Commercial gas customers in Mesa and the Magma service area (Queen Creek, San Tan Valley, Pinal County) | Seasonal service charge ($44.66 summer / $54.34 winter, proposed $47.66/$57.34 FY 25/26); Tier 1/Tier 2 usage charges by season; monthly PNGCAF gas cost pass-through; Magma adjustment factor where applicable. Average commercial gas bill ~$510-522/month. | — |
Rate Recommendations by Use Case
Multi-site C&I usage tracking
Consolidate all Mesa accounts under one My Utility Account login and use the usage analysis tools.
The portal's multi-account management and 24-month electric/gas/water history give portfolio teams a single first-party view, with download capability for offline analysis.
- Register every account with its account number and service ZIP
- Enable usage alerts for anomaly detection
- Download usage data regularly since history caps around 24 months
Third-party energy management access
Use the portal's guest access feature to grant consultants controlled visibility.
With no Share My Data program or API, guest access is the sanctioned third-party path — customers keep control while consultants view and download data.
- Pair guest access with a signed authorization letter for compliance
- Scope guest credentials per engagement and rotate them when work ends
- Escalate to Energy Resources for needs beyond what the portal shows
Bulk or programmatic data needs
Negotiate an enterprise data agreement with the Energy Resources Department.
Mesa has no customer-data API or EDI, but as a municipal utility it can arrange custom bulk export or reporting under a formal agreement — the practical route for large C&I accounts and platforms.
- Contact Director Scott Bouchie at 480-644-2156 or ted.stallings@mesaaz.gov
- Bring specific data elements, frequency, and format requirements
- Revisit after the 2026 SpyCIS migration, which may add capabilities
Market and benchmarking analysis
Pull aggregated consumption trends from the public Data Hub via the Socrata API.
The open data portal exposes electric consumption/customer counts and gas/water datasets with free JSON/CSV REST access — useful for benchmarking and territory analysis without any authorization overhead.
- Use https://dev.socrata.com docs for query syntax and filters
- Combine with the ArcGIS service territory layers for spatial analysis
- Remember the data is aggregate-only — no customer-level detail
Cost Optimization Strategies
Mesa's rate design concentrates controllable costs in three places: the 30-minute demand peak for electric accounts over 50 kW, seasonal Tier 2 usage charges that the city has raised aggressively (gas Tier 2 up 25% in one cycle), and the EECAF/PNGCAF commodity pass-throughs. Demand control, tier management, and the downtown attraction discount are the highest-leverage moves for C&I customers.
30-minute demand peak management
For: Non-residential electric accounts over 50 kW
Electric accounts over 50 kW pay $3.52/kW generation demand plus distribution demand charges set by the single highest 30-minute average each month. Staggering equipment start-ups, interlocking HVAC stages, and shifting batch loads off the peak window directly reduces billed kW.
Tier 2 usage avoidance
For: All commercial electric and gas customers
Mesa is deliberately steepening Tier 2 charges — non-residential gas Tier 2 rose 25% in FY 24/25 and another 5% proposed, and electric Summer Tier 2 rose 6%. Efficiency measures and load reduction that keep consumption out of Tier 2 earn the highest marginal savings per unit.
Downtown Small Business Attraction Rate (E3.6D)
For: New businesses siting in Downtown Mesa
New non-residential customers locating in Downtown Mesa can qualify for a 25% reduction on service, energy, demand, and EECAF charges during the eligibility period. Site-selection decisions within Mesa's electric territory should price this in.
Commodity adjustment tracking (EECAF/PNGCAF)
For: All electric and gas customers; especially large gas users in the Magma area
Both fuel adjustment factors move with wholesale costs — PNGCAF adjusts monthly. Budgeting against the adjustment factors separately from base rates, and using the city's Natural Gas Bill Estimator, prevents variance surprises and supports hedging decisions for large gas loads.
Smart Peaks participation and AMI monitoring
For: Electric customers in Mesa's downtown territory
Mesa runs a Smart Peaks demand-side program (manual enrollment) and provides usage history through the My Utility Account portal. Pairing portal usage data with Smart Peaks event participation trims both demand and Tier 2 exposure.
To implement these strategies, you need your 15-minute interval data. Learn how to download City of Mesa Utilities interval data →
Frequently Asked Questions
How do C&I customers access City of Mesa usage and billing data?▾
Register each account in the My Utility Account portal at https://utilities.mesaaz.gov/app/ using the account number and service ZIP. The portal supports multi-account management and provides up to 24 months of billing and payment history plus usage analysis and download for electric, gas, and water. Bills are available as PDF; there is no API or standardized structured export.
Does Mesa provide interval data from its smart meters?▾
Partially. Mesa's AMI rollout (Utility Partners of America, December 2021 through October 2026, more than half complete) supports 15-minute or hourly intervals, and the portal advertises usage analysis and download. However, the exact granularity and export formats are undocumented, and data only starts from each meter's smart upgrade date. There is no Green Button or ESPI export.
How can a consultant or energy manager access a client's Mesa data?▾
Use the portal's guest access feature: the customer signs an authorization letter, enables guest access in My Utility Account, and provides guest credentials to the third party, who can then view and download whatever the customer account shows. Mesa has no Share My Data program, customer-data API, or aggregator partnerships.
Does City of Mesa support EDI for commercial billing?▾
No EDI program is documented — no specifications, enrollment process, or VAN information exists publicly, which is typical for municipal utilities of Mesa's size. C&I customers needing electronic billing exchange should contact the Energy Resources Department directly (Director Scott Bouchie, 480-644-2156, or contactcenter@mesaaz.gov) to discuss custom arrangements.
What programmatic data does Mesa expose publicly?▾
Two free, no-auth APIs: the Socrata-powered Data Hub at https://data.mesaaz.gov/ with aggregated electric consumption/customer counts, gas, and water datasets (REST API, JSON/CSV export), and ArcGIS REST services at https://gis.mesaaz.gov/mesaaz/rest/services for service territory and infrastructure layers. Both are aggregate or spatial only — no customer-level usage.
Where are Mesa's utility rates published, and who sets them?▾
As a municipal utility, Mesa sets its own rates through the city budget process rather than the Arizona Corporation Commission. Current electric, gas, and water rate schedules are published as PDFs at https://www.mesaaz.gov/Government/Management-Budget/Utility-Rates; there is no retail supplier choice.
Automate City of Mesa Utilities Rate Analysis with Nectar
Nectar continuously monitors your City of Mesa Utilities rate options and alerts you when a better schedule is available. Save 10-30% on energy costs.
Nectar for Energy & Sustainability Teams
Managing utility costs for commercial or industrial buildings? Nectar offers a free rate analysis — we'll review your current rate schedules and identify where switching tariffs or shifting load can save 10-30%.
Get a Free Rate AnalysisNectar for Energy Brokers & Consultants
Advising clients on rate optimization? Nectar works with energy consultants who need reliable interval data and automated rate comparison tools.
Partner with Us