Flint Energies Rate Selection Guide

Flint Energies (Flint Electric Membership Corporation) is a not-for-profit, member-owned electric cooperative serving roughly 97,000-100,000 meters across 17 central Georgia counties. It provides billing and 13-month usage history through the e-bill.flintemc.com portal and the My Energy Account app, with interval/smart-meter data expanding as its fiber/AMI rollout completes (targeted 2026).

Georgia · Electric Cooperative·Regulated market·Fully supported by Nectar·Last updated June 4, 2026

Flint Energies Rate Schedule Comparison

ScheduleTypeRateBest For
General Service Demand (FGS-25)commercial$45/mo; $6.58/kW demand; 8.13 cents/kWh; + WPCAStandard commercial accounts with measurable demand
Large General Service Demand (FLGS-8)industrial$45/mo; $6.55/kW demand; 7.45 cents/kWh; + WPCAIndustrial / large commercial accounts >= 300 kW
General Service Non-Demand (FSGS-33)commercial$37/mo; 10.97 cents/kWh; + WPCASmall businesses under 20 kW / 4,000 kWh per month
Commercial EV Charging (CEV-1)ev$100/mo; 19.00 cents/kWh; 1.38% facilities chargeStand-alone commercial EV charging stations
01

Market Overview

Georgia assigns electric service territories under the Territorial Electric Service Act; cooperative members do not shop for a competitive supplier. Flint is member-owned with board-set rates and takes wholesale power as a Georgia EMC. C&I members take service under Flint's published rate schedules.

Market Type
Partially Deregulated
Supplier Choice
Not Available

Need to pull your actual usage data to compare rates? See the Flint Energies Data Access Guide →


02

Current Rate Schedules

Verified commercial and large general service rates from Flint Energies' published 2025 rate schedule book. Demand-rate accounts include a Service Charge, a Billing Demand charge ($/kW), and an energy charge (cents/kWh), all subject to the Wholesale Power Cost Adjustment (WPCA) rider. Billing demand uses the highest 15-minute demand over the current and prior eleven months (greater of 100% current or 85% of June-September peak), a demand ratchet.

Effective: April 1, 2025 · Full Tariff Book →

ScheduleTypeApplicabilityStructureRate
General Service Demand (Schedule FGS-25)commercialNonresidential consumers (excluding irrigation and poultry house loads) at one metering point not billed under another schedule.Service Charge $45/month; All kW of Billing Demand $6.58/kW; All kWh 8.13 cents/kWh; plus WPCA. Churches and seasonal sub-rates differ slightly. Demand ratchet applies.
Large General Service Demand (Schedule FLGS-8)industrialNonresidential accounts whose usage equals or exceeds 300 kW in any month.Service Charge $45/month; All kW of Billing Demand $6.55/kW; All kWh 7.45 cents/kWh; plus WPCA. Demand ratchet applies.
General Service Non-Demand (Schedule FSGS-33)commercialNonresidential accounts averaging <= 4,000 kWh/month over 12 months and not exceeding 20 kW in any month.Service Charge $37/month (single or three-phase); All kWh 10.97 cents/kWh; plus WPCA. Effective April 1, 2025.
Commercial EV Charging Station (Schedule CEV-1)evCommercial/industrial/governmental separately metered, stand-alone EV charging stations.Service Charge $100/month; Energy 19.00 cents/kWh; Facilities Charge 1.38% per dollar of dedicated local facilities investment; plus WPCA (per 2024 schedule).
Off-Peak Service (Schedule FOS-30)commercialParking lot lighting and similar off-peak loads.Service Charge $36/month; All kWh 9.91 cents/kWh; plus WPCA. Effective April 1, 2025.

03

Rate Recommendations by Use Case

🏭

Industrial / large facility (>= 300 kW)

Take the Large General Service Demand (FLGS-8) rate for the lower 7.45 cents/kWh energy rate, and manage the summer demand ratchet.

Recommended:
Large General Service Demand (FLGS-8)

Above 300 kW the energy rate drops to 7.45 cents/kWh, and the June-September peak sets billing demand for up to a year.

Tips:
  • Stagger large equipment to cap the summer 15-minute peak
  • Evaluate the LM-9 Load Management Rider for peak-shed credits
  • Use battery storage or generation to shave coincident peaks
Est. monthly: $45 service + $6.55/kW billing demand + 7.45 cents/kWh + WPCA
🏢

Mid-size commercial (demand-metered, <300 kW)

General Service Demand (FGS-25) accounts pay $6.58/kW and 8.13 cents/kWh; the demand ratchet rewards a flat summer profile.

Recommended:
General Service Demand (FGS-25)

Billing demand is the greater of 100% of the current month or 85% of the summer peak, so a single hot-day spike is costly for a year.

Tips:
  • Sequence HVAC and process startups to avoid coincident peaks
  • Watch June-September demand closely
  • Consider on-site solar (net metering) to trim daytime demand
Est. monthly: $45 service + $6.58/kW demand + 8.13 cents/kWh + WPCA
🏪

Small business (non-demand, < 20 kW)

General Service Non-Demand (FSGS-33) is a flat energy rate with no demand charge, best for small, steady loads.

Recommended:
General Service Non-Demand (FSGS-33)

Below 20 kW and 4,000 kWh/month the non-demand rate avoids demand charges entirely.

Tips:
  • Stay under the 20 kW / 4,000 kWh thresholds to remain non-demand
  • Reduce total kWh since energy is the only variable cost
  • Enroll in E-Billing and set usage reminders in the app
Est. monthly: $37 service + 10.97 cents/kWh + WPCA
🔌

Energy/analytics platform integrating Flint data

With no API, Green Button, or aggregator, plan for manual bill ingestion and customer-authorized data delivery.

Recommended:

Flint exposes only PDF bills and case-by-case Business Services delivery; automated integration is not available pre-2026 AMI.

Tips:
  • Use customer-downloaded PDF bills for ingestion
  • Submit signed authorization to Business Services for batch reports
  • Re-evaluate after the 2026 fiber/AMI rollout for possible CMD
Est. monthly: Manual; no platform fee from Flint

04

Historical Rate Trends

Flint adjusts rates on an April 1 cycle. The April 1, 2025 changes raised the residential and general-service base/service charges (e.g., General Service Non-Demand service charge rose to $37/month and residential to $36/month) while energy rates were largely held. The net-metering avoided-cost rate declined from 3.347 cents/kWh (2024) to 3.127 cents/kWh (2025).

April 1, 2025

Annual rate update: General Service Non-Demand service charge to $37/mo, residential service charge to $36/mo; net-metering avoided cost to 3.127 cents/kWh.

n/a

April 1, 2024

Prior annual update: residential base charge increased; net-metering avoided cost 3.347 cents/kWh.

n/a

Overall trend: Gradual base/service-charge increases on an annual April 1 cycle; demand and energy rates relatively stable.

Next expected change: Next adjustment expected April 1, 2026; monitor Flint's rate-change announcements.


05

Cost Optimization Strategies

The dominant cost lever for Flint C&I demand-rate accounts is the demand ratchet tied to the June-September peak. Holding down the summer 15-minute peak protects demand charges for the following year.

Summer peak ratchet management

For: FGS-25 and FLGS-8 demand-rate accounts

At ~$6.55-$6.58/kW, holding the summer peak 20 kW lower saves ~$131-$132/month (~$1,575/year)

Limit the single highest 15-minute summer demand (June-September), since 85% of it can set billing demand for up to twelve months.

Large General Service rate qualification

For: High-usage C&I accounts near the 300 kW threshold

~0.68 cents/kWh on energy; ~$680/year per 100,000 kWh

Accounts at or above 300 kW take the lower 7.45 cents/kWh energy rate on FLGS-8 versus 8.13 cents/kWh on FGS-25.

Load Management Rider (LM-9) credits

For: C&I accounts able to shed >= 100 kW or 50% during peaks

Up to ~$90/kW-year combined for participating demand

Reduce demand during top-10/top-5 system peaks for annual credits ($64.62/kW-year top-10, $25.59/kW-year top-5 in 2024).

To implement these strategies, you need your 15-minute interval data. Learn how to download Flint Energies interval data →


06

Frequently Asked Questions

Can a C&I customer get interval (15-minute) usage data from Flint Energies?

Not today. Bills show daily kWh and a 13-month comparison, but Flint does not expose 15-minute interval data to customers. For demand-rate accounts, billing demand is derived from the highest 15-minute demand internally. Granular interval data and possible Green Button support are expected after Flint's fiber/AMI rollout, targeted for 2026.

Does Flint Energies support Green Button, a public API, or third-party data platforms?

No. There is no Green Button and no public API/developer portal from the utility itself. Flint's privacy policy states it does not divulge customer information to third parties. Third-party access is case-by-case via Business Services with written customer authorization. Nectar provides API access to this utility's billing and interval data — see docs.nectarclimate.com.

How is commercial billing demand determined?

On the General Service Demand (FGS-25) and Large General Service Demand (FLGS-8) schedules, monthly billing demand is the highest 15-minute demand in the current month and prior eleven months, and is the greater of 100% of the current month or 85% of the peak demand in June-September. This 'demand ratchet' means a summer peak can drive demand charges for up to a year.

What are Flint's commercial and large-power rates?

General Service Demand (FGS-25): $45/month, $6.58/kW billing demand, 8.13 cents/kWh. Large General Service Demand (FLGS-8, accounts >=300 kW): $45/month, $6.55/kW, 7.45 cents/kWh. General Service Non-Demand (FSGS-33, 2025): $37/month, 10.97 cents/kWh. All are subject to the Wholesale Power Cost Adjustment (WPCA) rider.

How can a third party access our Flint Energies data?

Have the customer download and share bill PDFs, or submit a signed authorization letter to Business Services (1-800-342-3616 / hello@flintemc.com) and request periodic data delivery. Approval is discretionary and typically takes 2-4 weeks; there is no utility-provided automated or API-based option.

Automate Flint Energies Rate Analysis with Nectar

Nectar continuously monitors your Flint Energies rate options and alerts you when a better schedule is available. Save 10-30% on energy costs.

Nectar for Energy & Sustainability Teams

Managing utility costs for commercial or industrial buildings? Nectar offers a free rate analysis — we'll review your current rate schedules and identify where switching tariffs or shifting load can save 10-30%.

Get a Free Rate Analysis

Nectar for Energy Brokers & Consultants

Advising clients on rate optimization? Nectar works with energy consultants who need reliable interval data and automated rate comparison tools.

Partner with Us